Hot Racing 105mm Aluminum Heavy Duty Big Bore Shocks (2)

This is a pack of two Hot Racing 105mm Aluminum Heavy Duty Big Bore Shocks. These Hot Racing 105mm big bore threaded body aluminum shocks are for use with many Traxxas and other 1/10 scale off-road vehicles using 105mm length shocks.

Features:

• CNC machined 6061-T6 billet aluminum shock bodies, collars, caps, and spring retainers
• "Big Bore" threaded shock bodies
• CNC machined 11mm Delrin pistons
• 3.5mm stainless steel shock shafts
• Gunmetal and blue anodized aluminum components
• Vented shock caps with bladder seals for consistent rebound dampening
• Threaded shock collars with o-rings to prevent unwanted movement
• Composite plastic lower shock ends with aluminum balls
• Fully assembled, just add shock oil and bleed

Includes:

• (2) assembled shocks
• (2) M3x20mm flat head cap screws
• (2) M3x18mm button head cap screws
• (2) 3mm countersunk washers
• (2) 5.9 hollow balls
• (4) 1.5mm thick spacers
• (4) 3mm thick spacers

Requires:

• Silicone shock oil of modeler's choice and bleeding per the typical bladder shock bleeding procedure
• Best used with Team Associated shock Green Slime grease or shock o-ring grease when rebuilding lower seal
• Snap ring pliers when rebuilding lower seal

NOTES:

• Use spacers as need for installation
• Can be used with optional Hot Racing springs: SLF63FS261 (progressive), SLF63MR268 (linear), SLF63RS286 (progressive)
• Accepts optional Hot Racing silicone shock boot RDP34201
• Replacement parts are Hot Racing: RTD910BN (shock ends), RTD910RB (pistons and o-rings), RTD1010X (bladders and lower seals)